IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [ihc] transmission lines
Is it possible to use rubber hose (heater hose?) instead of the tubing or
would there be too much pressure? Can the nuts that go on the end of the
lines be obtained at an auto parts store like Napa?
-----Original Message-----
From: owner-ihc@domain.elided [mailto:owner-ihc@domain.elided] On Behalf Of John
Hofstetter
Sent: Monday, September 20, 2004 3:53 PM
To: Tom Harais
Cc: ihc@domain.elided
Subject: Re: [ihc] transmission lines
On Sep 20, 2004, at 8:13 AM, Tom Harais wrote:
> You can buy the tubing from an auto parts store. You'll need a good
> tubing
> bender and, you'll need a double flaring tool to make the required
> flares in
> the tubing ends. Cheap benders or double flaring tools don't work well
> and
> are a waste of money.
>
Tom,
I don't think transmission lines require a double flare. I certainly
wouldn't bother with double flaring those lines.
John
John Hofstetter
Ol' Saline
www.goldrush.com/~hofs
Home |
Archive |
Main Index |
Thread Index