Re: [ihc] Tcases

[bearbvd@xxxxxxxxxxxxxx (Greg Hermann)]

At 10:55 AM 8/11/04, Joel M Brodsky wrote:
>Ahhh. Okay, so if it looks like a 205 and the rods are side-by-side like a
>205 then it's a 205.  But if the rods are over-under,
>it's a 201 or 202?  Then the 205 and the 20 look a lot alike , and this one
>with the 3 bolt rear cap is a 205?
>Is there any need to make a 205 a twin stick?  Can it be done?

Serves the same purpose/needs as doing it to a 20. Yep, it's doable.

HOWINELL can you confuse a 205 with a 20 ?? The size difference is only
STRIKING ---

And--20's have no PTO cover---

Greg

>The reason I ask is because I got a deal on this 205 and it doesn't have a
>shifter assembly on it, so I can do whatever I want.
>
>JoelB
>
>
>
>At 3:07 PM 8/10/04, Joel M Brodsky wrote:
>>So, the 201 and 202 have the shift rods coming out of the TOP of the
>Tcase?
>>So, if it looks like a 205 and the shift rods point forward like a 205
>>does, then it's a 205?
>>
>>JoelB
>
>NO, the way he wrot that was corn-fusing. The axis of the rods runs fore
>and aft on all of them, but where the rods are side by side on a 205, they
>are one over the other on the 201 and 202.
>
>G
>r
>e
>g