Re: [ihc] Re: Wheel Studs

[bearbvd@xxxxxxxxxxxxxx (Greg Hermann)]

At 1:00 PM 7/29/04, Rocky Lear wrote:
>The stock RA 15 studs were 9/16". Dunno if Dorman sells 9/16" ones that
>will work or not. They DO have 5/8".
>
>Greg
>
>
>Well....all the one ton axles I have have the 1" nuts on them (ie 5/8
>diameter studs) . The RA15 that I was test fitting on is in the back of a
>73 1310 2wd. I don't have any IH one ton 4x4 axles with the 8 lug pattern.
>Those may have 9/16 studs. Of course the studs on the left side of the
>truck I have are left handed threaded which I don't care for either but
>the main thing is that the wheels I want to use need to  be used with 9/16
>diameter studs. Did the one ton 4x4's have 9/16 diameter studs?

Yep.

Greg
>
>Rocky