Re: [ihc] Fabco DanaIHC SDA9/12 & 02064

[bearbvd@xxxxxxxxxxxxxx (Greg Hermann)]

At 10:38 AM 4/9/04, Tom Mandera wrote:
>A friend of mine just acquired a used Detroit locker.
>

Well--as if you didn't know, the 02064 means it could also be called an 'FA-64'

Don't know if it still is, but Fabco was part of Kelsey Hayes for a long
time, and is located in Oakland, CA.

Fabco builds (built ??) steerable drive axles that have been used in a lot
of IH medium duty and HD 4x4's over recent years. I _SUSPECT_  (do NOT
_KNOW_) that the FA 64 is something you would find under the front end of a
4400 4x4--

Fabco also builds (built ??) some pretty neat transfer cases.

I don't know whether the Dana designation means that Dana-Spicer bought
Fabco from K-H recently, or simply that Fabco bought gears and other
'stuff' from D-S !! Could be either, or BOTH.

Greg

>It's a TracTech 250S-38, with Fabco DanaIHC SDA9/12 & 02064 listed as
>the application.
>
>I can't find 02064 in anything I have, but it looks like a good Lineset
>code for an axle.
>
>The Detroit is set up for 1.75" OD 16-spline axles.
>
>Can anyone elaborate on what this is for, more than "02064"? :D  And
>what the axle might've come in?
>
>Anyone need this Detroit?  I might know where there's one for sale. :)
>
>-Tom