Re: [ihc] D20 twin stick stock?

[bearbvd@xxxxxxxxxxxxxx (Greg Hermann)]

At 8:22 PM 3/22/04, Joel M Brodsky wrote:
>What are the chances one would find a Dana 20 Transfer case in a junkyard
>Model 800?

Well--if you find an 800 that still has is transfer case, it will be a Dana
20 2-stick IF if it never got molested !!

>Did 800s have twin stick D20s that mate up to a T18/19

There were 800 4 speeds that had a T-18 and a twin stick D-20. Takes a
different adapter to do a T-19--BUT--a 2 stick D-20 will mate to any T-19
that was set up for a D-20.

 or a 727?
>seems like it'd only be '70,'71 right?
>
>Anyway, if anyone wants to clue me in, I'll start looking closer when I'm
>in the yards.
>

>What about the chances of a Dana 18 twin stick that mate up to a T18/19 or
>a 727?

Can be done with J**p parts to a T-18.

If you have a T-19 set up for a D-20, you SHOULD be able to switch the bull
gear for a D-18 bull gear and bolt up a D-18.

Likewise with a 727.

Were there
>ever D18s mated to 727s?

MAYBE in a J**p !! If it was mated to a 904, it can be mated to a 727. You
need the right 727 mainshaft and the right rear bearing, then a 904/D-18
adapter matches with a 727.

Greg
>
>Thanks!
>
>JoelB