IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ihc] Radiatior expansion tank
----- Original Message -----
From: "mark stegmann" <truckdriver_1977@domain.elided>
To: "IHdigest" <ihc@domain.elided>
Sent: Saturday, January 10, 2004 23:47
Subject: Re: [ihc] Radiatior expansion tank
> > I bought a flare tool when working on fuel lines at
> > one point. They aren't
> > horribly expensive from your local parts store.
> > Just make sure it goes up
> > to the correct size.
> >
> > -Ryan
>
> I agree that a flare tool isn't that expensive, but
> don't buy an el-cheapo either. Get a name brand tool,
> like Lisle or even K-D has one I think, and their
> tools aren't too bad. If you have more money than
> common sense, get an OTC.
>
> Mark, parts store veteran for too damn long!!!!!!
>
Agreed.... I don't know what mine is, probobly the cheapo one. I also
bought a tubing cutter and it works nicely. I don't really know what I'm
doing with the flare tool though so the double flare ends up looking like a
piece of tubing with a bulge in it.. which works out since it still
accomplishes what I want to do without having any exposed edges.
Thanks,
Ryan
Home |
Archive |
Main Index |
Thread Index