[ihc] Bunch of Stuff for Sale (Axle Shafts, Bellhousing, Fans, etc. etc.)

[Mike Bellew <mochamike@xxxxxxxxxxx>]

Scout II D44 Rear Axle Shafts
I got 2 of them. 
Splines are in good shape.
One shaft missing/needs new studs.
Both have the plate & bearing still on.
$40 each or $75 for both +shipping.

IH Bellhousing (from a 345) w/fork, no pilot bearing
Flywheel (needs re-surfacing)
& Pedals 
$100 obo 
[IMG]http://thisdysfunctional.org/kids/Scout-Pix/IH_Bellhousing.sized.jpg[/I
MG]

Also have the following:
Stock Scout II Drag-Link $20+shipping
4 Spring Plates & U-bolts (missing nuts) $20+plus shipping ($10 if you buy
either of the above).  2 Plates are fine, 1 is slightly bent at shock mount
& another had the shock mount cut off.
These are Used & come off my friends Scout when he did a SOA.

2 Electric Fans out of Ford Taurus (these Crank Air!)
They would make a great conversion from Mechanical to Electric (not sure on
clearance issues as pullers, but they can be used as pushers as well...

One Speed.
Measures roughly 6"(D) x 16"(T) x 21"(W) plus mounting tabs.
The housing is about 3.5" deep, with another 2.5" for the fan motor.
$35+shipping
http://thisdysfunctional.org/kids/Scout-Pix/1_speed_back.sized.jpg
http://thisdysfunctional.org/kids/Scout-Pix/1_speed_front.sized.jpg

Two Speed.
Measures roughly 5"(D) x 16"(T) x 21"(W) plus mounting tabs.
The housing is about 3.5" deep, with another 1.5" for the fan motor.
To be honest, this came out of a 1990s Lincoln 3.8 engine (same as the
Taurus, & had the Ford logo on it...)
$50+shipping
http://thisdysfunctional.org/kids/Scout-Pix/2_speed_back.sized.jpg
http://thisdysfunctional.org/kids/Scout-Pix/2_speed_front.sized.jpg



Mike Bellew
Concord, CA
62 Scout 80, SBC 350, SM465, Dana 18,  D44s (Hi-Steer, Detroit/Spool,
Discs x4, blah, blah, blah), 35" Pro Comps, & 32 gallons of "Go" juice.
"All Whee Drive!"