IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [ihc] Rocky, 13" clutch!?



Well, that'd be my guess, but I was told that the 12" would fit in a T-19W,
and I find even that not to be the case.

Best of luck with it all..

JoelB


> Rocky,
>       Only as a cautionary note, I installed a 12" clutch in my 74 Scout
> II, 345, T-19, and the pressure plate mounting bolts his the bellhousing
> (or something).  Upon first startup after the 12", t19W, and Dana 300
swap,
> the clutch didn't work correctly, and the pressure plate bolts are all
> hitting something.
> I highly doubt that you can get the 13" clutch in there, but I could be
> wrong, it's happened before.
>
> I'm thinking I have to go back to a 11" clutch  to eliminate any
problems.
>
> Joel
> -not looking forward to pulling the motor/trans for the third time!
>

In other words, he needs to keep whatever bellhousing the 13" clutch went
with?

-Ryan


Home | Archive | Main Index | Thread Index