IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: wiring



Rick, My manual shows one wire going to the back up lights (marked 71A-16),
one going to the fuse panel marked (AZ71-16) and one going to a transmission
relay (marked CY17B-16) which connects to the starter and the ignition
switch

Hope this helps
Nick Leiterman
Kent, WA
iarenick@domain.elided

> -----Original Message-----
> From: owner-ihc@domain.elided [mailto:owner-ihc@domain.elided]On Behalf Of Rik
> DesJardin
> Sent: Saturday, May 29, 1999 4:51 PM
> To: ihc@domain.elided
> Subject: Re: wiring
>
>
> The neutral safety switch:   I have a green, brown and yellow wire coming
> from the switch.  Where do these wires go?  I labeled the black
> wires when I
> cut them off the old switch plug but the labels faded so bad I can't read
> them.  I have tried a few different combintations but can't get it right.
>
> Nobody responded to the above post so I did some more
> experimenting. i found
> that no matter which wire I ground the starter doesn't get juice.   I
> identified the back-up light wire but can't get it to work through the
> switch, I also identified the hot with ign wire.
> Halfway through my trial and error testing I blew something and filled the
> cab with smoke.
> .
> Rik<----feeling more electrically challenged than ever.
> If I had a hand grenade I might loose the pin and throw the
> pinapple towards
> the Scout.
>
>
>
>
>
>
>




Home | Archive | Main Index | Thread Index