IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: tranny seals



In a message dated 99-05-06 10:42:16 EDT, Dan wrote:

> Really? Yes the 4x4 rear seal is different for the 727. But, I
>  believe it was Tom Lang? that couldn't get the right seal for his 2x 727
>  and said that the rear seal I used for the 4x4 might have been what he
>  needed and by my examination of the parts manual showed the 2x and 4x4
>  seals to be the same.

This info could very well be correct most of the Scouts use a 4x4 trans even 
if they are 2x4 so the seals would be different. I have heard that the trucks 
and travelalls (some) use a different trans with the long tail shaft, same 
seal as std 727.

My .02
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tom Martin
twmart@domain.elided
'88 GMC Suburban
'73 Scout II  345 auto under construction
'73 Scout II  258 auto stripped and gone
'7? Scout frame and axles to replace my bent frame;-)

My Scout II Page
<A 
HREF="http://members.aol.com/twmart/index.html">http://members.aol.com/twmart
/index.html</A>
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~



Home | Archive | Main Index | Thread Index