Re: Buggy Springs

["Eppinger.Michael" <Eppinger.Michael@domain.elided>]

Hey Dan,
The springs are on the bottom of the frame rail on the front springs, and
out side the frame rail on the rear springs.  If you did the buggy springs
on the front without doing the shackle reversal, I am wondering if you slip
yoke would have enough slip to keep from bottoming out when you get the
extra droop on the front axle.  If you do the reverse shackle, then the slip
yoke would want to put apart at max droop, and bottom out on compression.
Just some things to keep in mind, ie you will probibly need a differant
front drive shaft.  I believe Bill bolted the buggy spring to the bottom of
the frame on his first generation buggy spring set up.

Hope this helps

Epp