[Fwd: HML: Fw: [MOG] Powder Coating...]

[Kevin Curry <kevin@domain.elided>]

Just so happens there is a thread going about powder coating on the Hummer
Mailing List too!

Michael Selig wrote:

> "Michael Selig" <mbs@domain.elided>
>
> I have used powder coating on both motorcycle frames and tube chassis for
> race cars.  It is tough stuff that is an excellent choice for most frame
> and suspension parts
>
> I have used Eastwoods kit - works
> well, but use an old stove or your wife will be unhappy.  For those on the
> list that are in Iowa I can rec. Rainbow in Cedar Rapids.  They have an
> oven to accommodate a entire chassis.   Most shops include blasting in the
> cost which eliminates the need for that equipment at home, and saves time.
>
> Jim Seaman wrote:
>
> > I've never used it but here is a link to a site that sells a Home Powder
> > Coating kit.  As I've said, I cannot endorse it but I read about it on a
> > classic car site and they thought that the results were excellent.
> > Anyway, it might be worth a try for $149 (using a standard kitchen oven
> > for smaller parts or add another $449 for the infra-red heater for the
> > large stuff...)
> >
> > http://www.eastwoodco.com/
> >

--
==============================================
Kevin & Lisa Curry <>< - Kevin@domain.elided
http://www.redhummer.net ICQ# 7653541
"It's not a matter of no one else being able to keep up. It's a matter
of no one else being able to follow." -from my Hummer poster
==============================================