Re: Scout II AT linkage length

To: tsm1@domain.elided (Tom Mandera)
Subject: Re: Scout II AT linkage length
From: cookiedan@domain.elided (Daniel Nees)
Date: Sun, 21 Feb 1999 20:51:24 -0500 (EST)
Cc: ihc@domain.elided
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: Tom Mandera <tsm1@domain.elided>'s message of Sun, 21 Feb 199918:44:05 -0700 (MST)
Reply-To: cookiedan@domain.elided (Daniel Nees)
Sender: owner-ihc@domain.elided

Tom,
   I would say that the shift cable is about 24" long. Maybe an inch or
two either way. The slack gets looped toward the back. You really can't
do anything with it forward or back. Up is ok like with a body lift, but
the cable is so rigid that it would kink if the loop wasn't just right.
I know this because I put my shift back together saturday and found I
have to pull the speedo cable off and put it inside the loop because it
is bending the loop down and making shifts hard.

_____Dan Nees_____
cookiedan@domain.elided
Keep Scoutin' and I'll be Travelalling along!
3 Scout II's and still counting!
http://members.tripod.com/~IHCaholic/scoutindex.html

Prev by Date: Scout II AT linkage length
Next by Date: Re: IHeloise
Prev by thread: Scout II AT linkage length
Next by thread: Re: Scout II AT linkage length
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index