IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Dan's Master cylinder



>But, this prevents the gasket from expanding to fill the space in the MC
>where the fluid is missing, doesn't it?

Umm... I don't *think* so.

It's just 2x the stock gasket.  I have two full gaskets, slipped inside each
other.  If you were paranoid, you could cut the center out of a gasket,
leaving the outer sealing rim... put that in the cover, then put a full
gasket inside that.

The goal is to double up the rubber lip/seal on the outer edge... which
makes the whole fit much tighter, and less leaks.

-Tom




Home | Archive | Main Index | Thread Index