RE: E30 Head Questions

["Will Hartje" <WHartje@xxxxxxxxxxx>]

Better than a swab, is to clean the old bolts, then put carb cleaner down
the holes and run the bolts in lightly, remove, clean and repeat, etc

- -----Original Message-----
From: owner-bmw@domain.elided [mailto:owner-bmw@domain.elided]On Behalf Of Tim
Piscitelli
Sent: Friday, December 21, 2001 6:36 AM
To: bmw-digest@domain.elided
Subject: re: E30 Head Questions

When I cleaned out the bolt holes on my 325is, I
repeatedly filled the holes with carb cleaner and then
stuck a swab down to dry it out.  Did that until the
swab came out clean.  Then stuck a vacume down there
(connected to a piece of fuel hose) to pull and chips
or garbage that was left.  The holes were squeaky
clean when done.

Tim
Check out Yahoo! Shopping and Yahoo! Auctions for all of
your unique holiday gifts! Buy at http://shopping.yahoo.com
or bid at http://auctions.yahoo.com




- --
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to majordomo@domain.elided

------------------------------