Re: Hazard relay

["William R. Dieter" <dieter@xxxxxxxxxxx>]

Noordien, Igshaan wrote:
>
> Some of the window switches are malfunctioning - I read somewhere about
> how to clean them out and solder new dimples on them.  What do you guys
> think about this procedure - oh the drivers window doesn't go all the
> way down when the button is pressed but rather drops about an inch or
> so.  So about ten presses gets the window all the way down...same for
> getting it back up.

I would start by swapping the switch for the drivers side window with
one of the other switches.  If the problem follows the switch, the
switch is at fault.  Otherwise it is something to do with the window.

I had a similar problem with the passenger side window.  I  followed the
cleaning procedure last summer and the window is still working...

Bill.

------------------------------

End of bmw-digest V9 #1820
**************************