permanent E30 strut brace >>> pls help

[toshi <toshi@xxxxxxxxxxxxxx>]

My car is being re-sprayed soon; 
While I have the shell stripped I have a chance 2 make a permanent strut
brace; A 2.5mm thick 40mm bent pipe (with torsional reinforcements)
welded between strut towers tops >>> designed 2 clear intake manifold
and bonnet of course; clutch reservoir will b relocated (RHD model)...
Q: With 3rd part strut braces have 3 contact pts (shockers mounts),
would this actually work? and possibly b stronger  that "normal" bars?
I'm not 2 good @ math 2 calculate the actual stresses and strains but
logically this should work;

also, I've read somewhere the springs on 325iS were actually lower
spring rate than OEM while being shorter? what would b an optimum spring
rate for a 950kg E30? I'm building a mild street car.

any replies appreciated

E30 323i Euro Coupe	8/83 M20/B23 L-Jet
Getrag 260 & 3.25 Diff	Various Liposuctions >>> 950kG
Opal Grun >>>> 	Daytona Violett soon :))
looking for a second job ;o

------------------------------