Re: Stripped Allen Bolt

["Brant M. Miller" <brant@xxxxxxxxxxxxxx>]

Jurgen -

If you are lucky, you can soak the allen screw in
WD40 or equal, drill it to accept an EzyOut, and use
the EzyOut (Spelling?) to remove the bolt.

If you are unlucky, you would need to drill the entire
length of the allen screw out of the wheel hub.

And if all fails, you would need to replace the wheel
hub.  But that should not be necessary if the above
two approaches are well done.

Good Luck

Brant

>Date: Fri, 26 Mar 1999 19:01:22 -0800 (PST)
From: Jurgen Gluhr <jurgen_m3@domain.elided>
Subject: <E30 M3> rotor, stripped allen bolt

i stripped the inside of one of the allen bolts that holds the
rotor in place.  what do i do?
jurgen<

------------------------------