re: Clogged Nozzle Performance Upgrade

[Herman Chan <hermanc2@xxxxxxxxxx>]

Jan suggested:

> Try a straight pin instead of the toothpick... I have cleared the
> nozzles on my cars that way, and yes, they CAN get plugged by wax,
> pitch, bird bombs, etc...
>
> Good luck, hope it is cheap and simple!
>
> Oh, on the 7, I can aim the nozzles at the same time with the
> straight pin as a lever. Insert it and aim, remove it and try,
> repeat until targeted where you want.

If you can't find a pin that's small enough, try a sewing needle.  For
smaller openings, use a straightened office staple.  It's not too long, but
very fine gauge and easy to source.  Both of these will help clear an
obstruction without wrecking the alignment.

Herman

------------------------------