[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: EURO Alarm LED connector



  If you are doing this for the first time, you will have to cut the two wires
going to the stock LED.  You would then solder the AMP .025" MOD IV contacts
to them.  Insert the result into the connector pin holder and slide on the pin
holder cover.  
   If you have already done this using the AMP .025" MOD IV contacts, simply
remove the shrink tubing from the contacts
and do as above.
  Connect to my home page and look under the interior heading which describes
how I did this prior to knowing about the connector.  Will update this to
reflect the connector when we get a chance.

 RonStygar@domain.elided FLY BMW
  http://www.eskimo.com/~dalus/bmw/bmw_ronstygar.html      

------------------------------

End of bmw-digest V9 #107
*************************