RE: [bmw] E36 M3, Ground Control Camber/Caster Plates and H&R Springs

[<maldav@xxxxxxxxxxxxx>]

Yes, Ground Control will only confirm the plates work with Eibach springs:
flat ground with an inside diameter of 60mm, 2.25 in or 2.50 in.  H&R
springs are neither flat ground, nor do they meet those ID requirements.

I thought maybe someone on the list has some experience with this.

------------------------------
Date: Tue, 13 Jan 2004 12:08:21 -0500
From: "FS" <freestat@domain.elided>
Subject: RE: [bmw] E36 M3, Ground Control Camber/Caster Plates and H&R
Springs

Hi Malcolm - out of curiousity did you ask the folks at Ground Control? I
thought the plates were just for coilovers...

Bill

Date: Mon, 12 Jan 2004 17:33:26 -0600
From: <maldav@domain.elided>
Subject: [bmw] E36 M3, Ground Control Camber/Caster Plates and H&R Springs

Does anyone out there have any experience fitting Ground Control
Camber/Caster Plates and any model of H&R springs on an E36 M3 (Gen
II/Post-96 MY if that is significant)?

Thanks.

Malcolm Davidow
Dallas, Texas

1997 BMW M3
--
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to majordomo@domain.elided