Re: [alfa] Lock Washers

["Dean" <tessiedog@xxxxxxxxxxxxx>]

Those bolt can be a real pain. Sometime they just will not budge. If they
are proving difficult cut the heads of with a grinder it makes life a hole
lot easier. Try to keep one, take it to a bolt shop and match them with high
tensile replacements.
Cheers Dean

----- Original Message -----
From: "HERRMANN, Andrew" <Andrew.Herrmann@domain.elided>
To: <alfa@domain.elided>
Sent: Tuesday, January 06, 2004 10:15 AM
Subject: [alfa] Lock Washers


> Hi all,
>
> Just starting to get into the DIY and need to ask a question. Thanks in
> advance!
> Is there a special technique required to remove bolts with lock washers?
>
> I mainly refer to the six bolts on the drive shaft at each end that fits a
six
> mm allen key. (Transaxle)
>
> Thanks
> Andrew
> 1979 Alfetta GTV
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided