Alfa Romeo/Alfa Romeo Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [alfa] water in GTV-6 doors & speaker installation
Agreed, people who fit aftermarket equipment are pathetic. Especially
exhaust and tyre fitters. I have had suspension bent (164), crap melted on
my alfettas, as it is apparently imposable to build a good exhaust for a
European car. I own a 24V 164 super which has had spliced into what is a
very complicated wiring loom, a mobile car phone, stereo and cruse control.
So in this case I have had three knuckleheads attacking the loom.
----- Original Message -----
From: "RonHorowitz" <RonHorowitz@domain.elided>
To: <alfa@domain.elided>
Sent: Tuesday, January 06, 2004 4:20 AM
Subject: [alfa] water in GTV-6 doors & speaker installation
> Hody, Folks!
>
> Since both subjects have come up recently, thought I'd throw in my .02.
>
> The plastic liners in the doors and the rear side panels are vapor
> barriers. Most inept car audio installers/knuckleheads have _no_idea_ of
> what those things are there for, nor would they be likely to care if they
> did, so they cut holes in them with complete disregard to the possibility
> of future damage. (IMHO, car stereo installers are 99.99% incompetant, but
> that's another subject....) The inevitable result is irreversible water
> damage to the press-board door and side panels.
>
> The moral of the story, as always, if you have a car you care about, be
> _careful_ who you let work on it.
>
> RON
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided
Home |
Archive |
Main Index |
Thread Index