Re: [alfa] 164 Brake master cylinder

["Daegrigg (Don)" <daegrigg@xxxxxxxxxxx>]

Jose,

Didn't see a response on this yet.  I have an S but have never had the MC
problem.  However, I have rebuilt the MC on my Alfetta with the same type L
connectors.  The rebuild kit included replacement fittings where the L (Yes,
it does pop out) fitting attaches.  If you can find a rebuild kit, the parts
should be included.

Don

----- Original Message -----
From: Jose R. Castro <jcastro@domain.elided>
To: <alfa-digest@domain.elided>
Sent: Tuesday, October 14, 2003 10:46 AM
Subject: [alfa] 164 Brake master cylinder


> My 1995 164 Super has developed a major leak a the top front connector on
the
> brake master cylinder, the front one that is connected to the fluid
reservoir
> by means of a small diameter rubber hose. The connector, I believe, is
pressed
> into the MC body and now is loose. I don't know if you can take out this
"L"
> shaped plastic connector and replace the seals or o-rings or if I need a
new
> master cylinder? Any info will be welcome. Worst case, can someone provide
me
> with the part number for this MC. My car is a 1995 164 Super, 3.0L 24V
with
> ABS.
> Jose R. Castro
> 1996 164 Super
> --
> to be removed from alfa, see /bin/digest-subs.cgi
> or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided