Re: Carb clean up

["Deno S. Gualtieri" <deno@xxxxxxxxxxxxx>]

Whenever I have attempted this, it seems that anything less than a 
complete tear down has always resulted in doing it a second time. I have 
found that it is the small passageways in the body that plug up.
Get a good manual before you start. There are small pieces that are 
easily over looked when reassembly is done. Disassemble the carb, one at 
a time, in a box to reduce the search for small parts. A gasket rebuild 
kit will be necessary unless you are very careful with the work. 
Murphy's law does apply.
Deno
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided