18 - 89 Fuel rail rebuild more info

["dan" <dan@domain.elided>]

Damien,
I just did this.. The hose I used was 5/16" inner diameter fuel hose
from O'Reillys.  You'll need four 2-1/8" long pieces for the injectors
and one 8 1/4" long piece for the cold start solenoid.  The old hoses
are hard to get off because of those metal caps, I read a trick in Alfa
Owner about using a drill bit to split the ends of the hose up into the
caps.  I agree, buy new upper & lower seals too.  The old upper seals
are easy to cut off, then slip on new ones from the bottom.  The
write-up isn't done yet but you can see some pics of my "fuel rail
rebuild" here:
http://kcaroc.pcbs.net/techses/89rebuild6/thumbs.asp
Dan in kc, 89 spider


- -----Original Message-----
From: owner-alfa@domain.elided [mailto:owner-alfa@domain.elided] On Behalf Of
Damien Gaboury
Sent: Monday, January 13, 2003 12:02 PM
To: alfa-digest@domain.elided
Subject: Fuel rack Spider 81-89

Hi all,

On Bosch injected spider from 81 to 89, is it possible to replace the
rubber
hoses on the fuel rack, I mean the hoses linking the fuel injector and
the
rack, or the fuel rack comes complete ?

Anybody know a place where I can buy such a fuel rack ?


Thanks all
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided