Fw: 164 "check engine" error code

["Daegrigg (Don)" <daegrigg@domain.elided>]

----- Original Message -----
From: "Daegrigg (Don)" <daegrigg@domain.elided>
To: "Ryan Kundrat" <ryankundrat@domain.elided>
Sent: Tuesday, December 17, 2002 12:47 PM
Subject: Re: 164 "check engine" error code


> Ryan,
>
> 1224 usually points to the O2 sensor.  In my case, the ground wire was not
> properly grounded to the engine.  If the car is running rich, (gas mileage
> down some), this can also point to the sensor.  Check the usual suspects:
> engine plumbing (hoses), AFM operation/connection (although this is the
1223
> code), 02 connections.  You can also have the emissions checked to see if
it
> suggests a faulty sensor.  Follow this link to the old archive for some
> additional troubleshooting tips.
>
> /alfa/FAQ/164/notes0.htm
>
> Also, check the digest archive.  There was a thread on this topic earlier
> this year.
>
> Don
>
> PS.  Are you sure you reset the code correctly - 2- sec hold, etc. ?
>
> ----- Original Message -----
> From: "Ryan Kundrat" <ryankundrat@domain.elided>
> To: <alfa-digest@domain.elided>
> Sent: Tuesday, December 17, 2002 12:55 PM
> Subject: 164 "check engine" error code
>
>
> > Does anyone have any experience with a 1-2-2-4 code on a 164?  The car
is
> > running perfectly, the light just started coming on once every few days.
> > That is the only code in there, and I have reset it once.  Thanks! -Ryan
> '92
> > 164S
> >
> > ------------------------------------------------------------------------
> >
> > MSN 8 helps ELIMINATE E-MAIL VIRUSES. Get 2 months FREE*.
> > --
> > to be removed from alfa, see /bin/digest-subs.cgi
> > or email "unsubscribe alfa" to majordomo@domain.elided
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided