RE: GTV6 Speedo failure

To: "TomQ" <zippy@domain.elided>, <alfa-digest@domain.elided>
Subject: RE: GTV6 Speedo failure
From: "John Katos" <john_katos@domain.elided>
Date: Tue, 10 Sep 2002 14:23:13 -0500
Content-transfer-encoding: 7bit
Content-type: text/plain; charset="us-ascii"
In-reply-to: <3D7E423F.4080803@domain.elided>
Reply-to: "John Katos" <john_katos@domain.elided>
Sender: owner-alfa@domain.elided

First check if the needle is warped, this is a common problem. If so,
remove, gentley heat and bend back into position.

John Katos
West Dundee, IL USA

-----Original Message-----
Hey my speedo died. I have taken it out the assy. Now how do I test it
to see what is specifically wrong with it? Resistance measurements, etc?
Thanks.
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided

References:
- GTV6 Speedo failure
  - From: TomQ <zippy@domain.elided>

Prev by Date: GTV6 Speedo failure
Next by Date: ignition controllers
Previous by thread: GTV6 Speedo failure
Next by thread: RE: GTV6 Speedo failure
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index