starter bad?

[FERDINANDO DI MATTEO <aroctek@domain.elided>]

It may be the solenoid so you will have to test it with an ohmmeter.
Check for continuity from terminal to ground.  If no continuity, replace
the solenoid.  If you get continuity, have the starter rebuilt at the
local starter-generator shop.  I assume the battery is fully charged?
to remove the starter you will have to remove the Carb support bracket
and with the right tools unbolt the starter being careful to note where
each bolt goes back, one is different.    Fred

On Wednesday, May 15, 2002, at 10:38 AM, Brose Olivier wrote:
Hello,
If the starter does not turn even with the jumper wire connected from
the + batery post to the solenoid terminal, can I say that the starter
is dead ?
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided