rear motor mount, the round one

["Ferdinando Di Matteo" <ferdinando.di@domain.elided>]

Steve, a propane torch heats the casting around the mount and it pushed out
easy as pie.  Of course, you must use your head and extreme care to prevent
fire.   Remove the drive line and the bolts holding the bell housing up,
then force the unit down a bit to be able to heat the casting all around.
Be sure to orient the new one exactly as the old one was mounted.   Freeze
the new unit and slip it in quickly while the casting is still hot.   Works
every time!  Fred Di Matteo

------------------------------