Re: GTV-6 Valve Cover Removal

[Chris Attias <cattias@domain.elided>]

Joe,

If you can't find a thinwall box wrench or socket,  you might want to make
one by carefully and slowly grinding away the outside of a thicker one
until it fits.  The cam cover bolts shouldn't be on very tight, so strength
of the tool isn't critical.  BTW, I replaced my hexbolts with a used set of
Allen screws from a Milano, bought over the phone from Alfa Parts Exchange,
Hayward, CA.  Easier to get inside a bolthead than outside, and can use
ball-head Allen wrench or Allen socket.

Chris Attias
'84 GTV-6

------------------------------