Re: The dreaded driveline vibrations

[JJK1204@domain.elided]

j.h.bouma@domain.elided writes:
<<  I thought I did
 everything right to prevent driveline balance problems by buying the
 complete unit, but the first test drive showed vibrations around 2800rpm.
 Much bad language ensued. >>
Jaap,

Two possibilities.
First, did you loosen the lock bolt on the front donut spider and let the 
shaft find its proper length?
Second, are you sure you put the blocks between the chassis and deDion back 
correctly?

Hope this helps, good luck,
John Katos
P.S. Currently putting a 1750 into my son's "new" 67 1300 GT jr. (Originally 
from the Netherlands no less!!!)

------------------------------