Re: alfa-digest V6 #19 RE: Marcantonio

[Fred Di Matteo <fredalfa@sprintmail.com>]

Sandro, you will probably find the wires into the Relay Set not making
good contacts.  Before you go jumping any wires, check to see if you
have 12 volts at the red wires and with ignition switch on, check the
pink/white wires for voltage.  If one has a voltage you can bridge the
two together and the pump should run.  I'd make sure all of the wire
connectors are making good contact before you go to a bridge.  

Make sure the connections on the pump motor are clean and tight.  
To say that the GTV-6 is living up to its name is absolutely wrong.  The
bad name pinned on Alfas are caused by incompetent back yard and dealer
mechanics who know too little about proper maintenance and don't care to
be meticulous about their work.  One of the elements that cause most
electrical problems is humidity, moisture and solid water attacking
connections.

Fred Di Matteo