[alfa] Milano wrong fuel pressure?

[X194ME@xxxxxxx]

The fuel pressure on the Milano reads about 27psi with the engine running, 
and about 36psi with the engine off (while opening the gate on the AFM), these 
readings where taken from  the cold start injector fuel supply hose.

The shop manual troubleshooting flow chart says "If you have more than 56psi 
replace regulator, if less than 56psi replace fuel pump"

In the Data Spec section of the (very confusing) shop manual says that the 
pressure it's supposed to be 36psi.

What would be the correct operating fuel pressure and should I meassure with 
the engine runing or just with the pump pressure?

Thank you in advance and best regards,

Gilles
'88 Verde
'87 Bertone X1/9
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided