Re: [alfa] Re: alfa-digest V10 #43

[th3 <th3@xxxxxxxxxxx>]

Thx for the direct response via e-mail. 

th

Brian Shorey wrote:

>>>Zamani give me the solution.  There is something called bolt out for 
>>>rounded bolts at Sears.  It did the trick.  If you do have 
>>>      
>>>
>>to grind a bolt head off, I would still like to know what you 
>>would use, especially in a tight area like the rear rotor bolts.
>>    
>>
>
>It's easy to grind them out, IIRC you can get at the bottom ones, then just
>rotate things so the others get down to where you can get at them.
>
>In my experience, once you've relieved the stress by gringind the heads off,
>and removed the rotors, the threaded part of the bolt usually comes out
>pretty easily.
>
>bs
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided