POR-15

[Twmart@domain.elided]

I have used the POR-15 product line and after talking to there Tech people 
here is what I have learned;
STEP 1; Marine-Clean-- just a HD degreaser you can use anything for this part.

STEP 2; Metal-Ready-- This is a metal treatment product it converts the rust 
and etches the bare metal (this is a must for Aluminum, SS and Galv.) The 
difference between this product and the others that have been talked about 
here is that the Metal-ready DOES NOT leave any residue to prevent rust. The 
other products DO leave a residue on the metal and this prevents the POR-15 
for sticking to the metal as well. You will notice that when you rinse off 
the metal-ready there will be a film of rust when it dries this helps the 
POR-15 to bond to the metal.

STEP 3; POR-15 paint 

STEP 4; Top coat POR-15 will fade if exposed to sunlight directly.

Later
Tom