Re: AGR PS pump

["Owen" <renarac@domain.elided>]

Here's a tip for getting the pully off a PS pump, without much fiddeling
with holding the pulley in place.

Hook an air impact ratchet up to it and hold the pulley in your hand if
you've got a good firm grip.

Whoop! Whoop! Whoop! In short little bursts and it's off. Be careful if you
don't have a good grip because you can catch your fingers between the pump
housing and the pulley.

I've also used a big wrench around the sides of the fingers on the puller
tool, but that wrench never seems to be handy when I'm into it.


----- Original Message -----
From: <DORKIEST@domain.elided>
To: <ihc@domain.elided>
Sent: Thursday, June 03, 1999 12:41 PM
Subject: Re: AGR PS pump


> In a message dated 99-06-02 20:00:36 EDT, you write:
>
> << AGR PS pump >>
> Robert D. I put on the Pump last year.  It's just a little more $$$ than a
> rebuilt.  If you just want more pressure, try the Jim Weed Pump pressure
> up-grade.
> http://www.off-road.com/~jweed/
> AGR pumps don't come with the reservoir or pulley.  Its not hard to put
> together, but I had a hard time taking my pulley off even with the right
> tools.   The Gear box is about the same as any rebuilt box.
> Scott Ray
> http://members.aol.com/DORKIEST/scout1.html
>