Re: Knuckle turning

[cookiedan@domain.elided (Daniel Nees)]

Rik,
   Your missing the point. What you do in a spring over is you turn the
pumkin up to point at the transfer case, then turn the knuckles to
restore proper camber. Then you add a CV joint to the transfer case side
of the driveshaft. The straight angle of the axle pinion  and the CV
joint eliminate the need for equal and oposite angles.

_____Dan Nees_____
cookiedan@domain.elided

1 Scout II 1979 named Good
1 Scout II 1971 named Bad
1 Scout II 1979 named Ugly 
I'm looking for a Travelall to name For a Few Dollars More. (It has to
be free the dollars are to spend on it)

http://members.tripod.com/~IHCaholic/scoutindex.html

http://www.triplediamond.org