Re: ihc-digest V6 #622

[Vinnie Moscaritolo <vinnie@domain.elided>]

On 3/8/99, Men from Black Helicopters forced "Ekelmann" to write :

>
> Date: Mon, 8 Mar 1999 11:02:34 -0800
> From: "amy lawson" <ajlawson@domain.elided>
> Subject: Re:closed loop
>
> I also need to know which wires connect to which on the wiring harness, any
> help is appreciated
> Ekelmann

You can send an email to "Holley Tech Support" <support@domain.elided> 
and ask them.

I seem to remember that the all the unit does is effect the throttle 
position sensor inputs, to try to get the system to run a bit closer 
to the 14/1 ratio.
As I understand it runs to lean anyawys.  As for connections I would 
suspect that the EGO kit requires one line to ground , one to power 
and three intercept the throttle sensor (grey/Blue/black).

let me know what you find out.. too bad Holley don't post the manuals 
on their webpage like so many other folks..



Vinnie Moscaritolo
http://www.vmeng.com/vinnie/
PGP: 3F903472C3AF622D5D918D9BD8B100090B3EF042
-------------------------------------------------------

Those who hammer their swords into plows,
will plow for those who don't."