FW: Jeep Wagoneer Axles

["Shubin, Pete" <PShubin@domain.elided>]

Someone was looking for some information regarding Wagoneer axles.  I would
verify the information.

> -----Original Message-----
> From:	klembry@domain.elided [SMTP:klembry@domain.elided]
> Sent:	Thursday, April 16, 1998 12:00 PM
> To:	Shubin, Pete
> Subject:	Re: Jeep Tech Question Wagoneer Axles
> 
> 
> 
> Pete,
> I've been told there is  a narrow and wide track version of the GW axles,
> and that I have the narrow track version.  I'll tell you the dimensions of
> what I have anyway - it's going into my '94 YJ.
> 
> '81 GW front Dana 44
> 60.5" to the wheel mounting surfaces
> 32" to the spring pad centers.
> 6 on 5.5" lug pattern: to change to 5 on 5.5" you'd need the spindles,
> bearing, hubs, and rotors from an '80 - '86 4wd F150 or Bronco.
> 
> They aren't too easy to find though...
> 
> Kerry
> 
> ----------------------------------------------------------------------
> Date: Fri, 3 Apr 1998 11:37:31 -0500
> From: "Shubin, Pete" <PShubin@domain.elided>
> Subject: FS Cherokee/Wagoneer Axle Width
> Anyone know how wide the front Dana 44 axles in full size
> Cherokees and Wagoneers are?  I'm looking for the wheel
> mounting surface - wheel mounting surface dimension.
> Also, how wide were the springs used in these trucks and
> what was the center to center dimension of the spring
> mounts on these axles?  These axles do have the six lug
> bolt pattern, correct?
> ===> Message End <======================================================
> To unsubscribe see http://www.off-road.com/4x4web/jeep/jeeplists.htm
> This mailing list is proudly sponsored by Off-Road.com, Inc's Jeep Pages
> http://www.off-road.com/4x4web/jeep
> ------------------------------
> 
>