IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Unimailer post #4 to Montana Tom about 345 with 392 heads
hmmmm Montana Tom...but ya didnt shoot pool all that well....well at all
for that matter.
Hey Tom when we going wheeling.
TOM BE VERY CAREFULL ON PUTTING 392 HEADS ON THE 345.
I had a buddie that had this happen and the valve train had to be shimed
because he milled the head and also the water jacket overhung the block by
a bit and peed water out the side. He welded it up and resurfaced it but
was still unable to get the intake to properly align since he milled the
head. It was weird ...I dont know mabey he had the wrong
heads...improver-vs-unimproved..whatever be carefull.
Fleckster
#########################################################################
John L. Fleck
"The Fleckster"
BACK COUNTRY BINDERS:
1225 N.E. Mcgee Way Pullman, WA. 99163
Phone# 509 332-7565
E-MAIL jlfleck@domain.elided
http://www.wsu.edu:8080/~jlfleck/BCB.html
http://www.wsu.edu:8080/~jlfleck/Scout.html
For fabrication of your ideas, and speciality scout parts(Stainless,
Aluminum, steel...etc)
##########################################################################
Home |
Archive |
Main Index |
Thread Index