Re: Firewall connectors

[scoutnb@domain.elided (Bryan Andersen)]

John L. and All,
  In the manual (78, 79, & 80),For the 78 the drawing of the Scout does
show 3 connectors and the drawings of each connector show three small
rectangular shaped connectors. One for engine, one for front, and one
for rear.
 In the 79 section, the drawing of the Scout show three connectors too,
yet only has two drawings for  individual connectors.  One round (the
one by the hood latch) for the rear, and one square (the one on the
pass. side by the brake booster) for engine and front.
 The 80 section shows only two connectors on the drawing of the whole
truck and has the same individual drawing of the connector as the 79.
  Some Scouts, apperently the later models (including mine), do only
have two bulkhead connectors. A round one for the rear harness, and a
square one for the engine and front harness.
 I hope this clears things up.

Happy Scoutn,
Bryan