[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: 32 m/m wrench for fan clutch removal
- Subject: RE: 32 m/m wrench for fan clutch removal
- From: "Fadeev, Alex" <alex.fadeev@xxxxxxxxxxx>
- Date: Tue, 20 Feb 2001 14:17:09 -0500
Purvis Brad Civ UAVB/DOI [mailto:brad.purvis@domain.elided] wrote:
>
> All:
> Planning to do the water pump and timing belt at the same
> time and need the 32 m/m wrench without spending a fortune.
> Any suggestions as to where and how much would help.
Brad,
For high quality 32mm Facom wrench and another tools check out
www.ultimategarage.com
Plan 'B' would be any local bicycle shop. Just get one with a long enough
handle so that you could whack it with a hammer if the fan nut is seized on
the water pump.
alex f
------------------------------