[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

E34 Shimmy & Clunking

The shimmy is most likely the thrust arm bushings although a runout 
measurement of the rotors will confirm if the rotor/hub assembly is within 
spec  (anything over .10mm or .004" is likely to be felt in the pedal or 
steering wheel when braking).  The clunking is probably the front sway bar 
links...these are easy to replace but you should use a thin 16mm open end 
wrench (eg, Facom 0031-16) to hold the end joints in place while you 
tighten the locknuts.  SD

==================================
Steve D'Gerolamo - The Ultimate Garage
201-262-0412 / steved3@domain.elided / http://www.ultimategarage.com  

------------------------------