<E30> HELP Can not get at top transmission Torx Blot

["Koehler, Erik" <Koehler@xxxxxxxxxx>]

a twelve point box end wrench will work, if i remeber correctly you will
need an 8 and 11 mm, i believe for the bolt you are attempting to get to an
11 mm will do the trick. good luck.

- -erik




>>Date: Sun, 29 Nov 1998 08:03:17 -0800
>>From: "Zaphod & Trillian" <zaphod@domain.elided>
>>Subject: <E30> HELP Can not get at top transmission Torx Blot

>>Does anyone know how to go about removing the top toxr bolt that is on the
>>drivers side
>>of the transmission?

>>You can just see it from the engine compartment but to remove it that way
>>would require
>>a torx box end wrench.  Does any one make one or is there some special
trick
>>to removing
>>that bolt?

------------------------------