[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
re: CV joint & bearings
Bary Pfaff wrote:
>> Also, a really bad joint can make growling sounds if the internals are
degraded significantly.
>> Look for torn dust boots, leaking at the joint and also try rocking the
axle shaft to assess any
>> lateral movement. If you are hearing a growl, chances are it's a bearing
as these tend to
>> wear quicker than a CV joint.
Bary:
I have a '91 325i (E30). I've been hearing this sound recently coming from
the front of my car. I would guess the engine, but it could be a wheel.
The howling/growling sound begins at 45mph, and it really sounds like a
forced air induction system that is sucking in air. Do you think this is
the bearings, and/or CV joint? Is this something I should resolve before
travelling 500 miles over Thanksgiving?
Thanks,
Ted Staib
Fairfax, VA
- ----------------------------------------------------------------
The information transmitted is intended only for the person or entity to
which it is addressed and may contain confidential and/or privileged
material. Any review, retransmission, dissemination or other use of, or
taking of any action in reliance upon, this information by persons or
entities other than the intended recipient is prohibited. If you received
this in error, please contact the sender and delete the material from any
computer.
------------------------------