[Prev][Next][Index][Thread]
Re: <E36> Removing Sunglass Holder
-
Subject: Re: <E36> Removing Sunglass Holder
-
From: Mauricio Lopez-Hodoyan <mhodoyan@domain.elided>
-
Date: Thu, 01 Aug 1996 09:38:00 -0700
Mike,
Put your hand in the sunglass holder face up. With you fingers feel around
the top of the holder for a small circular hole. Stick your index and fore
fingers in the hole (if they both fit) and push the bottom of the OBC up and
out. If all goes well, the bottom of the OBC should tilt towards you about
1/4 inch. Now, with you free hand, try to pull on the OBC so that the top
part comes out about a quarter of an inch also.
The OBC should now be about 1/4 inch out on all sides. Grab it with both
hands and pull it up and out. NOTE: there is a a small tab centered on the
bottom plane of the OBC about 1/4 inch back. You will need to make sure
that tab clears the top of the sunglass holder in order to get it out (it
may seem impossible but with a little effort, it will come out).
To remove the sunglass holder slide it up (in the void where the OBC used to
be) and pull it out.
Installation is. . .the reverse of removal :)
Good Luck,
Mauricio
>
>Can anyone tell me how to remove the sunglasses holder and the OBC in a E36?
>
>Thanks
>
>Michael
>94 325is