RE: [bmw] e36 M3 Injectors

["Stephen Andersen" <steve.andersen@xxxxxxx>]

I am pretty sure that the 95 M3 uses 17.5 lb injectors, while
the OBDII M3 (96 and later) uses 21.5 lb injectors, so they
are probably not swappable.

However, check into this, as I am not 100% sure...

Steve

> -----Original Message-----
> From: owner-bmw@domain.elided [mailto:owner-bmw@domain.elided] On 
> Behalf Of Michael Stoneman
> Sent: Monday, February 16, 2004 9:35 AM
> To: BMW Digest Submission
> Subject: [bmw] e36 M3 Injectors
> 
> 
> Can someone help me out here?  I've got one or two injectors 
> on my 95 M3 that are not performing properly causing a slight 
> engine miss.  Will injectors that were originally installed 
> on 96 and later M3's (not the updated ones) work as 
> replacements for mine?  I have access to a low mileage donor 
> fuel rail and will replace them all at a fraction of the cost 
> of new ones.
> 
> Mike Stoneman
> --
> to be removed from bmw, see /bin/digest-subs.cgi
> or email "unsubscribe bmw" to majordomo@domain.elided
--
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to majordomo@domain.elided