[bmw] RE: [UUC] Radio serial # ?

["Karl Zemlin" <kzemlin@xxxxxxxxxxxxxxxx>]

Pulling the radio out is so extremely simple - just do it.  I think a 2.5mm
allen wrench is all you need.  Flip the little tabs out on the bezel -
loosen the socket head screws that are back there.  Loosen them as far as
they will go without CRANKING on them.  The radio just slides out and all
the wires stay connected.  Find the number and write it down.

Slide the radio back in and tighten up the screws (just snug is all they
need to be).  Total elapsed time - about 3 minutes.

-----Original Message-----
From: bmwuucdigest-owner@domain.elided
[mailto:bmwuucdigest-owner@domain.elided] On Behalf Of eevans@domain.elided
Sent: Friday, February 06, 2004 8:55 PM
To: E36M3; bmwuucdigest@domain.elided; bmw-digest@domain.elided
Subject: [UUC] Radio serial # ?


Search the ARCHIVES:http://www.mail-archive.com/bmwuucdigest@domain.elided


Hi,

I remember a while back someone posted a maneuver to find out the radio's
serial # w/o removal. Anyone know how to do this?

Thanks

Evan


__________________________________________________________________________
In memory of Michel Potheau - friend, enthusiast, founder of the BMW CCA.

UUC Motorwerks - BMW Performance Fine-tuning and home of the Ultimate Short
Shifter - accept no substitutes! 908-874-9092 . http://www.uucmotorwerks.com
--
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to majordomo@domain.elided