[alfa] Spring cleaning/parts/tools for sale

["Jeff Greenfield" <alfaguy@xxxxxxxxxxxx>]

I'm cleaning out the garage and have the following items that I would like
to clear out. If no one here wants them, they'll go on ebay, but quite
honestly I'd rather not be bothered.



I'll include priority mail postage on most of the items unless noted
otherwise. I'd prefer payment through paypal as it is quick and convenient.



First come first serve, if there is no interest at the prices listed, I'll
consider offers .



Here we go:



Adjustable fuel pressure regulator for a 2.5 V6 (Milano or GTV-6). Should
also work on a 3.0, ordered for a project I was working on sometime ago, and
wound up not using it. Brand new, never installed. It is supposed to be able
to fit in the stock location replacing the original regulator, but will be a
very tight fit, and might interfere with the plastic timing belt covers, so
remote mounting might be required. Cost me $133.00 to get, how about
$120.00?



Used Shankle V6 headers, removed from a 2.5 Milano. Includes left and right
upper and lower sections, and a modified original cat that will fit the
headers and bolt up to the stock exhaust. Chrome is discolored, lower
sections are kind of beat (pipes are partially crushed from scraping the
road). No hardware, or gaskets included. Removed from a running car (no
leaks) and replaced with CSC headers. $40.00 PLUS ACTUAL SHIPPING CHARGES.



Clevite V6 2.5 Std mains. New, (sort of). Installed these in an engine that
I was building, and had a problem with the crank not turning when the caps
were torqued down. Sent the block and crank to the machine shop (again),
they line-bored the block, and supplied another set of bearings. So I wound
up with an extra set. Some scuff marks on them since they were installed,
but no significant scratches, gouges, or wear marks. $15.00



V6 thrust washers, alfa number 60513374/2, new. Not sure which engines these
fit, but they do not fit early 2.5s unless you cut grind the tab off them.
Pretty sure that this all that is available from Alfa at this time. $10.00



V6 (164) intermediate shaft and sprocket, part numbers 00605.13125.0000 and
00605.13131.0000 respectively. Was told that these were a superceded number
and would fit an earlier 2.5 V6 (Milano) if both were used. I wound up
having a local tool and die shop repair my damaged shaft since the new parts
did not fit that engine, cost me a lot for these two pieces, $45.00.



Left side Spider 'B' pillar trim, fiberglass reproduction, beefier than the
original plastic part that always breaks, new never installed. Should fit
all 105/115 spiders with single (trunk only) release handle. $45.00



Spider upper steering column shroud. Brand new, never installed. Part number
00605.18554.0000, probably fits mid 80s spiders. DOES NOT fit a series 4 car
('91 - '94). The screws that hold the upper and lower sections together
screw into the plastic in the upper piece, which always strip or pull out of
the plastic. $12.50



F&S 1600 release bearing (2 available), Should also fit 1300s in original
boxes (boxes are dirty) one is new and has never been installed (round
mounting ears). The other appears to be new, but can't say for sure
(semi-circular mounting ears) I have no idea how I wound up with these.
$25.00, and $15.00 respectively, Does not include mounting clips



GTech pro performance meter, brand new in original box, never used. Costs
about $140.00 new, $45.00



Blaupunkt Monterey DIN sized Head unit, single CD player, removable face
plate. Includes mounting sleeve, and instruction book (instructions are
stained). Excellent condition, worked fine when removed. Had this in one of
my own cars, removed it when I sold the car, never installed it another car,
and it is just taking up space collecting dust. Very clean design, unlike
most modern aftermarket head units these days. $75.00 (or make offer)



Older well used Radio Shack DMM. Works pretty much ok, kind of erratic when
reading low ohms or checking for continuity. Probably needs new batteries
and possibly a new set of leads (old leads are included). Free for the cost
of priority mail postage, probably about $6.50 or so. Too good to throw
away?



Central Tools Bore Gauge Model #6462, Used in excellent condition in fitted
plastic case, measures bores from 2.6" to 7.0". $180.00 new, in a current
tool catalog, $70.00



That's it for now, If I find more as I clean the garage I'll let you know.
Feel free to ask any questions, I can send digital pics of any of this if
need be.



Thanks,



Jeff
--
to be removed from alfa, see /bin/digest-subs.cgi
or email "unsubscribe alfa" to majordomo@domain.elided